+86 318 2883050 tingy.yu@orientcarbongraphite.com     EnglishRussia
You are here: Home > Ramming Paste > Ramming Paste
 
 

Ramming Paste

Ramming paste is also named tamping paste or Lining Paste, it is produced from calcined petroleum coke, calcined anthracite and other binder materials. Ramming paste is intended for a tamping of seams both between bottom cathode blocks and between sidewall cathode carbon blocks in aluminium reduction cells. It is also used for hearth construction in foundry furnaces as well as iron and steel-making furnaces, and for electric arc furnaces tap hole closing.

  • Product Details

Ramming paste is also named tamping paste or Lining Paste, it is produced from calcined petroleum coke, calcined anthracite and other binder materials. 


Ramming paste is intended for a tamping of seams both between bottom cathode blocks and between sidewall cathode carbon blocks in aluminium reduction cells. It is also used for hearth construction in foundry furnaces as well as iron and steel-making furnaces, and for electric arc furnaces tap hole closing. 


Product form: 

Ramming paste consistency - loose or mouldable materials. 


Packing: 

In big bags

In metal containers


Technical specification:

Type

TP-1

TP-2

TP-3

TP-4

Ash content % (max)

1,5

4,0

8,0

12,0

Volatiles content % (max)

12,0

12,0

12,0

12,0

Bulk density g/cm3 (min)

1,65

1,62

1,60

1,55

Compressive strength MPa (min)

10

10

20

20

Heat conductivity (min)

14,0

10,0

6,0

2,0


If required, other values of parameters might be agreed upon.

Contact

Head Company: Orient Carbon Group

Telphone: +86 318 2883050

Email: info@orientcarbongraphite.com

             tingy.yu@orientcarbongraphite.com

Website: www.orientcarbongraphite.com